User manual

# Name of area Description

4. Configuration

Summary

This area shows a summary of the server parameters

for the configuration line selected in the Configuration

Lines area.

The summary displays the following information:

1. codec type - bitrate - video standard

2. based config - INs/OUTs - No. audios

3. SDTI No. - server name - server type

5. Task bar The Task bar (Server-based application) displays

commands for the main actions in the window.

See section "Navigability and Commands" on page 9

for more information.

5'. Status bar The Status bar (web-based interface) displays:

• the Multicam Setup application status

• the date and time of the last refresh

• the Refresh button

6. Server Information This area displays the following information on the EVS

server:

• genlock status (OK or bad)

• timecode and timecode status (OK or bad)

• IP address of the LAN PC

2.1.2. Navigability and Commands

In the Server-Based Application

General Navigability

The following table presents the general commands to navigate in the Multicam Setup

window:

Command description Command key

Moving the cursor to the first item of the Tools menu F9

Moving the cursor to the first configuration line ESC

Moving down in the list of editable items

(configuration lines and Tools commands)

TAB

Moving up in the list of editable items SHIFT+TAB

Displaying a Help window that gives a summary of

the commands

9 2. Multicam Setup

EVS Broadcast Equipment S.A. - November 2012 Issue 11.01.B