User manual

Supported Modes
1 PGM Mode
In a single PGM mode, users working in a Spotbox configuration with IPDirector no longer
need to use two channels in PGM/PRV mode to play back a playlist with effects.
When they activate the mix on one channel feature, they can play back a playlist with
effects using only 1 PGM.
Multi PGM Mode
In a multi PGM mode, the Load PL setting interacts with the use of the Mix on one
channel setting as shown in the table below. The table summarizes how the play
channels are used when you load a playlist in 2 PGM mode, depending on the defined
settings:
Mode
Mix on one
channel?
Load Playlist?
V3X Mod 1 V3X Mod 2
OUT1
Prim.
link
OUT1
Sec.
link
OUT2
Prim.
link
OUT2
Sec.
link
2 PGM No Conditional Cut Cut
2 PGM Yes Conditional Mix Mix
2 PGM No Always Mix PRV
2 PGM Yes Always Mix PRV
When users set the Load PL parameter to 'Conditional', and enable the Mix on one
channel setting, they can use load playlists on both play channels, and play them with
effects, or only play back a playlist with effects on PGM1, while using PGM2 to play back
something else.
XT2+ Server- Version 11.01- Configuration Manual
3. Multicam Configuration 110