User manual
Channels and Control Settings
Introduction
The Channel and Control settings mainly allow specifying which controllers (main and
possibly secondary) have the hand on which play or record channels.
These fields are available in the following interfaces:
• in the Multicam Configuration window, Channels tab, in the advanced display mode
on page 1 on the server- and web-based interfaces.
• in the Technical menu of the Remote Control Panel (T2.3 to T2.6).
The following screenshot highlights the Channel and Control settings, defined on page 1
of the Channels tab in the server-based application:
Name
Description User-defined name for play or record channel. This name will
be used for the OSD, and in the IPDirector application suite.
The name can contain maximum 24 characters.
99 3. Multicam Configuration
EVS Broadcast Equipment S.A. - November 2012 Issue 11.01.B