User manual

Setting Name Basic Advanced
Technical
Setup
SD OUT Encoding X
Timecode insertion settings — P9 —
IN Loop settings X
SD OUT settings X
HD OUT settings X
3.4.2. Channels
Base Settings
Introduction
The base settings allow defining the main characteristics of a configuration as regards
play and record channels.
These fields are available in the following interfaces:
• in the Multicam Configuration window, Channels tab, in the advanced display mode
on page 1 on the server- and web-based interfaces.
• in the Technical menu of the Remote Control Panel (T2.X).
Warning
Some base settings (Inputs, Outputs Base config.) require an application reboot
(ALT+Q from the operational windows) for changes to be taken into account.
The following screenshot highlights the Base settings, defined on page 1 of the Channels
tab in the server-based application:
93 3. Multicam Configuration
EVS Broadcast Equipment S.A. - November 2012 Issue 11.01.B