User manual

Glossary

Multicam Configuration window

Window in the server-based and web-based Multicam Setup application

from where you can define all configuration parameters.

Multicam Setup application

Term used to refer equally to the server-based or web-based user inter-

face used to set up and configure the EVS servers

Multicam Setup window

Initial Window in the server-based and web-based Multicam Setup appli-

cation, that is displayed when the EVS server is not running a given con-

figuration yet. It gives access to the configuration lines defined on the

EVS server and to the commonly used maintenance tools.

Operational Setup menu

Menu accessible on the Remote Panel using the SHIFT+D keys form the

main menu. It allows users to define operational parameters.

Server-Based Multicam Setup application

Server-Based application used to set up and configure the EVS servers.

The short form is 'Server-Based application' in this user manual. This is

accessible from the EVS Server itself when it has been started.

Technical Setup menu

Menu accessible on the Remote Panel using the F0 key. It allows users to

define currently used configuration parameters.

Web-Based Multicam Setup interface

Web-Based interface used to set up and configure the EVS servers. The

short form is 'Web-Based interface' in this manual. This is accessible

from any machine (PC or server) that is on the same network range as the

EVS server. This can be accessed from a web browser using the

58 Glossary

EVS Broadcast Equipment S.A. -November 2011 Issue 11.00.C