User manual

3.2.2. Video and Reference
Video and Reference Settings
Introduction
The Video and Reference settings are available on the Server tab in the server-based
application (1
st
page) and web-based application. These settings are not available in the
Technical Setup menu of the Remote Panel.
The Video and Reference settings are highlighted in the screenshot of the server-based
application shown below:
Field Rate
Description Field frequency used (Hz).
Both field rate and resolution give the video standard.
Values 50.00 Hz (PAL) - default
59.94 Hz (NTSC)
59.94 Hz (J)
44 3. Multicam Configuration
EVS Broadcast Equipment S.A. -November 2011 Issue 11.00.C