User manual

Overview on Configuration Parameters
The first topic of each section in the Multicam Configuration chapter gives you an
overview on the parameters available in this section, and specifies whether you will find
the parameter:
• in the basic or advanced view in the server-based application and the web-based
interface
• in the Technical Setup, Operational Setup, or not at all on the Remote Control panel
The following list provides a hyperlink to all overview topics in the various sections:
• Server settings
• Channels settings (not currently available)
• Network settings (not currently available)
• Monitoring settings (not currently available)
• Protocol settings (not currently available)
• GPI settings (not currently available)
• Operations settings (not currently available)
3.1.2. Overview on the Multicam Configuration
Window
Introduction
In the server-based and web-based applications, all server settings related to each
configuration file are now grouped in a single window: the Multicam Configuration window.
When the server is not running a given configuration, the Multicam Configuration window
allows you to define any of the configuration available in the Multicam Setup window.
When the server is running a given configuration, the Multicam Configuration window
allows you to modify the settings of the running configuration.
The Multicam Configuration window is organized in a similar way in both user interfaces:
• It consists of seven tabs.
• Each tab contains one or more pages in the server-based application.
• Each tab displays all settings on a single page in the web-based application.
• The settings on page/tab are organized in field groups having a dedicated name.
36 3. Multicam Configuration
EVS Broadcast Equipment S.A. -November 2011 Issue 11.00.C