User manual

2.5.4. Clearing Video Disks
This function is used to erase all media from the RAID disk array.
Warning
This will definitely delete all video and audio data, including protected clip and
record trains.
To clear video disks, proceed as follows:
1. In the Multicam Setup window, press C to call the Clearing Video Disks command.
2. Press ENTER.
3. Confirm the deletion with ENTER or cancel with ESC.
2.5.5. Calibrating a Touch Screen
When a touch screen option is connected and the touch screen option is installed, a touch
screen can be calibrated using this command. If the touch screen is not installed, a
warning message is displayed.
2.5.6. Importing and Exporting Keyword Files
Introduction
The keyword file is a simple text file with a name of 8 characters and a .KWD extension.
All keyword files must be stored in the C:\LSMCE\DATA\KWD directory of the server. A
sample keyword file (SAMPLE.KWD) is provided by EVS when Multicam is installed.
You can also import and export keyword files to and from the EVS server via a USB key.
You can only perform this action in the server-based application.
How to Import a Keyword File
To import a keyword file, proceed as follows:
1. Save the keyword file you want to import on a USB key, and plug it into the USB port
of the EVS server as the Multicam Setup window is open.
2. In the Multicam Setup window, press K to call the Import/export keyword file
command.
The following dialog box opens:
XT3 Server-Version 11.00-Configuration Manual
2. Multicam Setup 33