User manual

How to Import Configuration Lines
In the Server-Based Application
Note
In the server-based application, the configuration lines are imported from a USB
key. For this reason, you first need to insert into EVS server (USB port on the
front panel) the USB key that contains the .lin file to be imported .
Warning
If the EVS server is password-protected, you should deactive the password
protection. Otherwise, you will only be able to import the operational settings of
the configuration lines selected for import.
1. In the Multicam Setup window, press M to call the Import Configuration Lines
command.
A message informs you that the USB key is being parsed for the detection of folders
containing configuration files (.lin files).
2. The Import Configuration Lines window opens:
◦ The left pane allows the selection of the folder containing the configuration files to
be imported.
◦ The right pane allows the selection of the configuration lines to be imported onto
the EVS server.
3. On the left pane, use the UP ARROWor DOWN ARROW key to highlight the folder
that contains the configuration file you want to import.
When the folder is selected, the right pane shows:
◦ in orange the configuration lines that will be imported to the server.
The lines are imported onto the same position and with the same name as in the
export file.
◦ in white the configuration lines that will remain unchanged on the EVS server (no
import).
4. Press TAB to shift the focus to the right pane.
12 2. Multicam Setup
EVS Broadcast Equipment S.A. -November 2011 Issue 11.00.C