User manual

5. If requested, change the location where the export folder will be created:
◦ By default, the export folder is created on the root of the USB key, so <Root> is in
a green font.
◦ To change the folder where the export folder will be created, highlight the
requested folder. The last highlighted folder will be considered as the requested
location.
6. To start the export process, press ENTER.
7. When the selected lines are exported (as a .lin file) on the USB key, a message opens
to confirm the export. Click OKto acknowledge the message.
In the Web-Based Interface
Note
In the web-based application, it is only possible to export configuration lines one
by one.
To export configuration lines from an EVS server in the web-based application, proceed as
follows:
1. From the Multicam Setup window, click Export configuration lines in the Tools menu.
The Export configuration line window opens:
2. Click Export next to the configuration line you want to export.
3. In the File Download dialog box, click Save.
4. Select the location where you will save the export configuration file (.lin file) and, if
requested, change the file name.
5. Click Save.
The export file is saved at the requested location.
If you want to export several configuration lines, repeat this operation for all requested
configuration lines.
XT3 Server-Version 11.00-Configuration Manual
2. Multicam Setup 11