User manual

Description of the Areas
The table below describes the various parts of Multicam Setup window:
# Name of area Description
1. Title bar The title bar displays the following information:
• Multicam version
• server facility name (if any)
• chassis type
• server serial number
2. Configuration Lines This area shows all configurations the EVS
server can run.
For more information, see sectionSee
"Configuration Lines" on page 7
3. Tools This area provides the main commands for
server administration and maintenance.
For more information, click the Tools command
below to go to the dedicated sections in the
Multicam Setup chapter:
• Import/export configuration lines
• Assign server facility name
• Import/export keyword files
• Export log files
• Options code management
• Hardware check
• Raid Configuration
• Set LAN PC address
• Set date and time
• Clear video disks
• Touch screen calibration
• Default to VGA
• Reboot
• Enable password for technical settings
4. Configuration Summary This area shows a summary of the server
parameters for the configuration line selected in
the Configuration Lines area.
The summary displays the following
information:
1. codec type - bitrate - video standard
2. based config - INs/OUTs - No. audios
3. SDTI No. - server name - server type
XT3 Server-Version 11.00-Configuration Manual
2. Multicam Setup 3