User manual

6.2.4. CODConnectivity in 3D and 1080p Single
Link 3G-SDI
This section describes the connector assignments and layout for the video standards HD
3D and 1080p in Single Link 3G-SDI mode.
Connector Assignments
Con-
nector
3D/1080p Mode
Connector
label
J1 N/A CHAR SD
J2 SDI program output 2D
(SD, down-converted)
Not wired to the
backplane.
Used for
onboard
multiviewer
input
J3 SDI program output 2D
(HD)
OUT B
J4 SDI monitoring output for left eye (3D) or link 1 (1080p)
(HD/SD)
CHAR OUT
SD/HD
J5 Not installed IN B
J6 3G-SDI program output for left & right eyes (3D) or link 1
& 2 (1080p)
(3G, identical to J7)
OUT
J7 3G-SDI program output for left & right eyes (3D) or link 1
& 2 (1080p)
(3G, identical to J6)
OUT
J8 3G-SDI input left & right eyes (3D) or link 1 & 2 (1080p)
(3G)
IN
J9 Alternate 3G-SDI input
(3G, for hardware loop)
Not wired to the
backplane.
Used for loop in.
Note
The loops of the input signal are not genlocked.
XT3 Server- Version 11.01- Hardware Technical Reference Manual
6. Boards Description 77