User manual

Connector Assignments
Connector SD mode HD mode
Connector
label
J1 J5 is factory-wired to the backplane instead of J1.
You can connect J1 instead of J5 if CVBS monitoring
is required in SD or HD mode.
SDI monitoring is no longer available on J1.
CHAR SD
CVBS monitoring output (SD) CVBS monitoring
output
(SD, down-
converted)
J2 SDI monitoring output (SD) SDI monitoring
output
(SD, down-
converted)
Not wired to the
backplane.
Used for
onboard
multiviewer
input.
J3 Loop-through for the SDI input
signal (SD)
Loop-through for
the SDI input
signal
(SD, down-
converted)
OUT B
J4 SDI monitoring output (SD) SDI monitoring
output (SD/HD)
CHAR OUT
SD/HD
J5 Not used Not used IN B
J6 SDI program output
(SD, identical to J7)
HD SDI program
output
(HD, identical to
J7)
OUT
J7 SDI program output
(SD, identical to J6)
HD SDI program
output
(HD, identical to
J6)
OUT
J8 SDI input (SD) HD SDI input (HD) IN
J9 Alternate SDI input
(SD, for hardware loop)
Alternate HD SDI
input
(HD, for hardware
loop)
Not wired to the
backplane.
Used for
internal loop in
Note
The loops of the input signal are not genlocked.
72 6. Boards Description
EVS Broadcast Equipment S.A. - January 2013 Issue 11.01.B