User manual
Connection Diagram With EVS XHub SDTI Hub
Example of XNet2 network with a SDTI hub:
5.6.3. Required Conditions to Set up and Run XNet
1. All systems on the network must be XT2, XT2+, XT3 or XS family servers, and XF2,
XStoreSE, XHub2, or XHub3 devices.
2. The SDTI advanced option code (for network client, master, or server modes) must be
validated in the options list.
3. They should all be running compatible software version. A warning message is
displayed when trying to connect an EVS video server with a software version that is
not compatible with the network server.
4. The following parameters must be similar on all systems: SDTI speed (1485Mbps in
Hardware Configuration menu)
5. Network Type must be set to “Server” on one and only one EVS video server on the
network. The others must be set to either “Master” (to share clips and view others
clips) or “Client” (to share clips only).
XT3 Server- Version 11.01- Hardware Technical Reference Manual
5. Hardware Installation and Cabling 53