User manual

To ensure the failover, the backup links between IPDirector workstations and the XT3
servers need to be physically wired to a second RS422 port, as shown on the following
schema:
The serial link redundancy will ensure that there is no single point of failure in the setup.
However, you need to put into place a thoroughly thought through IPDP configuration for
the SynchroDB to continue working correctly. This can be achieved, for example, by
defining an IPDirector workstation in Network mode.
50 5. Hardware Installation and Cabling
EVS Broadcast Equipment S.A. - January 2013 Issue 11.01.B