User manual

Analog Audio
The analog audio inputs and outputs are available on multi-pin (DA-15) connectors for
audio signal inputs and outputs in analog format.
See section "Audio Connections" on page 45 for more details on the connectors pinout
according to the different configurations.
The analog connector layout is as follows:
Config Layout Description
All • 4 multi-pin DA-15
connectors
(2in and 2out)
RS422 Ports
The RS422 ports allow the server to be remotely controlled through remote panels or third-
party control devices.
In Spotbox mode, the remote panel, if used, should be connected on the first RS422 port.
The RS422 connectors layout is as follows:
Config Layout Description
All 4 connectors
XT3 Server- Version 11.01- Hardware Technical Reference Manual
5. Hardware Installation and Cabling 43