Installation Manual Version 1.
Xsquare – Version 1.1 – Installation Manual EVS Broadcast Equipment – November 2012 Issue 1.1.C Copyright EVS Broadcast Equipment – Copyright © 2005-2012. All rights reserved. Disclaimer The information in this manual is furnished for informational use only and subject to change without notice.
Issue 1.1.C II Xsquare – Version 1.
Xsquare – Version 1.1 – Installation Manual EVS Broadcast Equipment – November 2012 Issue 1.1.C Table of Contents TABLE OF CONTENTS .................................................................................................... III 1. XSQUARE INTRODUCTION ....................................................................................... 1 2. SOFTWARE INSTALLATION...................................................................................... 2 3. XSECURE MANAGEMENT ...................
Xsquare – Version 1.1 – Installation Manual EVS Broadcast Equipment – November 2012 1. Issue 1.1.C Xsquare Introduction The goal of the Xsquare solution is to act as an orchestrator receiving job requests and dispatching them to the best engine (loadbalancing, JOB API, etc), which means an engine available and able to manage the requested job (transcoding, rewrap, etc). The engines will first be limited to XTAccess.
Issue 1.1.C 2. Xsquare – Version 1.1 – Installation Manual EVS Broadcast Equipment – November 2012 Software Installation The installation package is based on a suite of software with one installer and subinstallers in subfolders. In the Installers folder you can retrieve all sub-installers (the EVS Software and Microsoft required software). The Microsoft required software could be removed from the package in case of Update. To install the Xsquare suite, proceed as follows: 1.
Xsquare – Version 1.1 – Installation Manual EVS Broadcast Equipment – November 2012 Issue 1.1.C 3. Press NEXT. 4. Select the destination directory to install the new software and then press NEXT. 5. You can select here the different Xsquare modes: • StandAlone setup: The installer will install Xsquare, XTAccess and all the required software. The installer will also automatically associate XTAccess to Xsquare. This Installation mode will not ask other confirmations or questions.
Issue 1.1.C Xsquare – Version 1.1 – Installation Manual EVS Broadcast Equipment – November 2012 • Advanced setup: The installer will show you all the software installed on your computer and you will be able to select manually the software to install. This Installation mode will require for each installer other confirmations and questions. This mode should be used by EVS experts only. Note that a shortcut of Xsquare has been automatically created on the desktop.
Xsquare – Version 1.1 – Installation Manual EVS Broadcast Equipment – November 2012 3. XSecure Management 3.1 Introduction Issue 1.1.C To be able to manage more than 4 XTAccess with Xsquare and to be able to have the Xsquare user rights, it is necessary to have an Xsquare license. XSecure uses hardware information from the device where Xsquare is running. This means that it is impossible to exchange licenses or codes between devices. Please refer to the XSecure user manual to: 3.
Issue 1.1.C 6 Xsquare – Version 1.
EVS Broadcast Equipment Liège Science Park 16, rue Bois St Jean B-4102 Ougrée Belgium Corporate Headquarters North & Latin America Headquarters Asia & Pacific Headquarters Other regional offices available on +32 4 361 7000 +1 973 575 7811 +852 2914 2501 www.evs.tv/contact To learn more about EVS go to www.evs.
