Operating Manual Manual

Issue

10.04.A

XSense

–

Version 10.04

–

Operating Manual

EVS Broadcast Equipment – January 2011

Note

The abbreviated word “(Loc.)” appears next to the name if the local

machine is currently selected for clips and/or for record trains. The clips

displayed in the clip screen belong to this machine.

9.3.3 THE FUNCTION BAR

The second line displays the available functions. Each function can be called by

the corresponding F_ key of the keyboard, or by clicking with stylus & tablet on

the corresponding area on this line.

F1: Name

This function is used to name a clip. For more information on how to name a clip

in the VGA, refer to the section 9.3.8 ‘How to Name a Clip’, on page 54.

F2: Clip/Cam

This function toggles between CLIP mode and CAM mode.

• In CLIP mode, actions on a clip will use all available cameras for this clip.

• In CAM mode, actions on a clip will only use the selected camera for this clip.

Other functions such as Name, Delete, Copy, Set TC, >Archive depend on this

mode selection.

F3: Call

The operator can gain immediate access to a local or network clip by typing its ID

number.

F4: Pref

This option changes the primary camera of a clip. For information on how to

change the primary camera of a clip, refer to the section 9.3.9 ‘How to Change the

imary Camera of a Clip’, on page 54.

F5: View

This option changes the standard display to the extended display and vice versa.

Refer to the section 9.3.14 ‘Clip Screen – Extended View’, on page 59.