Operating Manual Manual

XSense

–

Version 10.04

–

Operating Manual

EVS Broadcast Equipment – January 2011

Issue

10.04.A

Note

The operational buttons have PRIMARY and SECONDARY functions and

are divided into upper and lower sections. By pressing the SHIFT button

you gain access to the secondary functions.

1. F-keys & small

buttons

Multi-purpose keys

2. Soft keys With LCD display, allows the operator to enter the

Multicam MENU system

3. Jog dial Used to accurately cue disk recorder

4. Operational

block 1

PLST Initiates active playlist

LOOP This option records the main output (PGM1) to the first

input (CAM A) of Multicam.

BROWSE Used to browse through clips, playlists, cue points

INSERT Used in playlist management to insert clips into a

playlist

IN Sets Mark IN at the current position

GOTO IN Goes to the defined Mark IN

OUT Sets Mark OUT at the current position

GOTO OUT Goes to the defined Mark OUT

TAKE In PGM+PRV mode, pressing this button swaps cameras

on PGM and PRV monitors

In Multi-PGM mode, pressing this button toggles

between CAM selection and PGM selection modes.

In 2 PGM mode, when both PGMs are selected on the

Remote Panel, pressing this button swaps the content

loaded on PGM1 with the one loaded on PGM2 and vice-

versa.

In Playlist Edit mode, pressing this button inserts the

clip loaded on the PRV channel into current playlist.