User manual

The XNet2 connectors allow the interconnection of EVS servers, and/or XStore in an
XNet2 network. The IN connector of a server is connected to the OUT connector of
another server, and so on to form a closed loop network.
The GPI connector allows GPI (General Purpose Interface) devices to send or receive
electric pulses that will trigger commands on the server or to be connected with third-party
devices.
The Audio Monitoring Output connector is a DA-15 connector that allows audio output
connections for monitoring purposes.
Gigabit Ethernet Connector Module
The Gigabit Ethernet Connector module is located at the bottom center of the rear panel.
It hosts the two Gigabit-H3X Ethernet connectors by default:
The Gigabit-H3X Ethernet connectors allow the interconnection of servers, other EVS,
and/or third-party systems into a Gigabit Ethernet network, with a global bandwidth of 1
GbE.
Power Supplies
The server power supply is made of two hot-swappable units. Both of these units are
connected to allow automatic power switching to the second power supply should the first
one fail.
5.3. Video Connections
You fill find full details on video connections in the Configuration manual, in the chapter
"Supported Configurations".
HARDWARE TECHNICAL REFERENCE MANUAL XS Server 12.05
5. Hardware Installation and Cabling 55