User manual

Controls and Communications
This rear panel part, located below the audio connectors, presents connectors that allow
the EVS server to communicate with other devices. The connectors are described from
top left to bottom right:
The RS232 connector allows a tablet to be connected to the server.
The RS422 ports allow the server to be remotely controlled through remote panels or
third-party control devices. When a remote panel is used, it should be connected on the
first RS422 port.
Two PC LAN connectors allow connection of the PC LAN interface of the EVSserver to
an Ethernet network.
The Console connectors allow a monitor and a keyboard to be connected to the server.
Controls and Communications
This rear panel part, located on the right of the codec connectors, presents connectors
that allow the EVS server to communicate with other devices. The connectors are
described from top left to bottom right:
The SAS-HDX connector allows the connection to the external disk array SAS-HDX if it
is installed.
The Multiviewer connectors allow a monitor to be connected directly to the server, and to
display PGM and REC channels as configured in the Multicam Configuration window, in
the Monitoring tab, Multiviewer page. See the Multicam Configuration manual for a
description of the configuration parameters.
54 5. Hardware Installation and Cabling
EVS Broadcast Equipment SA Issue 12.05.B- July 2014