User manual

5. HARDWARE INSTALLATION AND CABLING 43
5.1. Rack Installation 43
5.2. Rear Panel Description 44
5.2.1. Rear Panel Configurations 44
5.2.2. 6U Rear Panel Layout 44
5.2.3. 4U Rear Panel Layout 51
5.3. Video Connections 55
5.4.1. Audio Channels 56
5.4. Audio Connections 56
5.4.2. Digital Audio DA-15 Pinout 57
5.4.3. Analog Audio DA-15 Pinout 58
5.4.4. Monitoring Audio DA-15 Pinout 59
5.5. RS422 Connections 60
5.5.1. RS422 Connector Pinout 60
5.5.2. Redundant IPDP Serial Link 60
5.6. XNet Network 61
5.6.1. Introduction 61
5.6.2. Network Architectures 62
5.6.3. Required Conditions to Set up and Run XNet 63
5.6.4. Starting XNet 65
5.6.5. XNet Performances and Troubleshooting 65
5.7. Gigabit Network 66
5.7.1. Functional Overview 66
5.7.2. Backup of Clips 68
5.7.3. Restore of Clips 69
5.7.4. Important Rules 70
5.7.5. Switches 71
5.8. GPIOConnections 72
5.8.1. GP In Connections 72
5.8.2. GP Out Connections 75
6. BOARDS DESCRIPTION 77
6.1. Boards and Slots Configuration 77
6.2. V3X Video and Reference Boards 78
6.2.1. Description 78
6.2.2. CODConnectivity in SD and HD 81
6.2.3. CODConnectivity in 3D and 1080p Dual Link 85
6.2.4. CODConnectivity in 3D and 1080p Single Link 3G-SDI 87
6.2.5. CODConnectivity in 4K 89
6.2.6. Channel Assignment 91
6.3. Audio Codec Board 93
6.4. H3X Board 94
6.5. 10GbE Board 96
6.6. RAID Controller Boards 98
IV Table of Contents
EVS Broadcast Equipment SA Issue 12.05.B- July 2014