User manual

SAS-HDX
The SAS-HDX connector allows the connection to the external disk array SAS-HDX if it is
installed.
The SAS-HDX connector layout is as follow:
Config Layout Description
All SAS-HDX
connector
Power Supplies
The server power supply is made of two hot-swappable units. Both of these units are
connected to allow automatic power switching to the second power supply should the first
one fail.
5.3. Video Connections
You fill find full details on video connections in the Configuration manual, in the chapter
"Supported Configurations".
5.4. Audio Connections
5.4.1. Audio Channels
The XS server manages up to 64 embedded audio channels, depending on the chosen
variant and the installed hardware.
The embedded audio modules and codecs can be used as input or output channels for
embedded, digital (AES/EBU), or analog audio signals.
Depending on your server configuration you can find the following audio connectors on the
rear panel:
• Digital audio:
◦ DA-15 connectors: 16 inputs and 16 outputs (110 Ohm balanced).
◦ BNC connectors: 8 inputs and 8 outputs (75 Ohm unbalanced).
◦ XLR connectors: 8 inputs and 8 outputs (110 Ohm balanced).
HARDWARE TECHNICAL REFERENCE MANUAL XS Server 11.02
5. Hardware Installation and Cabling 49