User manual

Setting Name Basic
Operational
Setup
PGM/PRV mode X X
Internal loop mode X X
Grab X X
Browse button X X
Default XFile X X
3.9.2. OSD Settings
User Interface
The OSD settings allow users to specify which and how the information will be displayed
on the OSD.
These fields are available in the following interfaces:
• in the Multicam Configuration window, Operation tab, in the basic display mode on
page 1 on the server- and web-based interfaces
• in the Operational menu of the Remote Control Panel (1.1)
The following screenshot presents page 1 of the Network tab in the server-based
application, where the OSD settings are available, and highlights the OSD settings area:
Cue number on OSD
Description Enables / disables the display of the cue point number on the
OSD of the output monitors when a cue point is recalled inside
a record train.
Values Yes (default) / No
166 3. Multicam Configuration
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013