Configuration Manual Manual

Timecode Insertion Settings
User Interface
The Timecode Insertion settings allow the management of VITC or ANC timecodes
channel by channel.
These fields are available in the following interfaces:
• in the Multicam Configuration window, Channels tab, in the advanced display mode:
◦ on page 7, 8 or 9 on the server-based application
◦ on page 1 on the web-based interface
The following screenshot shows the Timecode Insertion settings in SD on page 9 of the
Channels tab in the server-based application:
The screenshot below shows the Timecode Insertion settings in HD.
CONFIGURATION MANUAL XS Server 11.02
3. Multicam Configuration 119