User Manual

XFLY.STREAMER – Version 1.03 – User Manual
EVS Broadcast Equipment – September 2013
Issue 2.0
21
To start the recording, proceed as follows:
1. Click this shortcut to launch the XFly. Streamer software. The following screen
appears:
2. Select the XFly hardware (storing device) and the processing device (i.e. XTAccess)
from the two drop-down lists in the upper left corner. The local system and software
if present always appear in bold at the top of the list.
3. Then check a server family to filter the servers list:
4. Into the server list, click the server drop-down list to display the list of available
channels: