User Manual Instruction Manual

◦ 5.1: six audio channels are used
6. Repeat the 2 last steps for the remaining channels.
9.2.16. How to Change the Order of Channels
inside a Track
If required, you can re-assign the order of the channels inside a group.
To do so, proceed as follows:
1. Right-click an audio channel box.
One of the following contextual menus appears:
◦ Mono:
In this case, there is no other choice.
◦ Stereo:
USER MANUAL Xedio 4.35 Xedio Manager
9. Softwares 99