User Manual Instruction Manual

Allow Export to Target When selected, allows to export the storyboard to a
predefined target.
Allow Text Insertion Allows to insert text.
Output All Stereo to
ST1
Only applicable for “all stereo” edits, not for 5.1.
When selected: all stereo tracks are mixed out to ST1.
Otherwise: ST1 to ST1, ST2 to ST2, ST3 to ST3,…
9.2.13. How to Edit a Parameter Profile
To edit the parameters values of a profile, proceed as follows:
1. In the Application Selection area, select <GENERAL> or the application in which a
parameter profile should be edited.
2. Select the profile in the Profile Selection area.
3. In the Parameters area, edit the parameter in the Variant Values column
◦ by selecting or clearing the box corresponding to a parameter (check box)
◦ by adding the required value (field to enter a value)
◦ by selecting the required value (option list)
◦ by defining it in a specific window for a name format string (see section "How to
Modify a Name Format String" on page 95)
◦ for the audio parameters, see section "How to Define New Default Audio Channel
Assignment" on page 97.
The default values can be changed by editing the <default> profile.
4. Click the Save button to save the selected profile.
Note
The modifications from the <default> profile are highlighted in the Parameters
area.
94 9. Softwares
EVS Broadcast Equipment SA Issue 4.35.B- August 2013