User Manual User Manual

2. Click the button to mark the IN point.
On the video display, a " [" is shown on the frame and a green line appears on the
media bar.
3. Determine the OUT point for the clip in one of the following ways:
◦ Use the transport functions, or
◦ Drag the nowline to the selected position, or
◦ Enter a value in the OUT field.
4. Click the button to mark the IN point.
On the video display a " ] " is shown on the frame and a red line appears on the media
bar.
5. If needed, select the audio for the clip.
6. Enter a name for the clip in the Clip Name field.
You can then use the clip in the Storyboard.
USER MANUAL Xedio 4.35 Xedio Cutter
3. Player 29