User Manual

10.3.2. Possible Audio Channel Functions
The functions available via the Audio Channels command are divided into four groups of
sub-commands. A mark is displayed in front of the commands applied to the selected
elements:
Group of Sub-
Commands
Description
These commands allow specifying the source track you want
to be applied to the selected element.
These commands allow the user to specify whether the track
should be output as a mono or as a stereo track.
These commands allow the user:
• to route the left or right audio channel to both stereo
channels
• to mix both stereo channels into one audio mono channel
These commands allow the user:
• to mute the left or right audio channel
• to swap the left and right audio channels
• to swap the left and right channels and mute one of them.
182 10. Advanced Audio Editing
EVS Broadcast Equipment SA Issue 4.35.B- August 2013