User Manual

• Drag the clip in the blank area, while pressing the ALT key:
If the clip is… Then…
greater than the
hole in the timeline
The clip speed will be decreased to match the blank area.
smaller than the
hole in the timeline
The clip speed will be increased to match the blank area.
The following criteria must be met:
• the parameter “Can Accelerate” must have been enabled in
Xedio Manager > Softwares > Parameter Profiles > CleanEdit.
• the maximal speed, set with the “Max Fast Motion Speed”
parameter, must not be exceeded.
Example
The following screenshots show the situation before, during and after the drag-and-drop
operation using the blank fill option. In this case, the clip is dropped at the beginning of the
blank area.
Before
During
120 7. General Editing
EVS Broadcast Equipment SA Issue 4.35.B- August 2013