User Manual User Manual

Xedio Suite Version 4.2 – User Manual – CleanEdit

EVS Broadcast Equipment – June 2012

Issue 4.2.B

193

Note

The Digigram board controls the configuration for the audio inputs and

outputs of the workstation. It is therefore recommended to configure the

Digigram board as shown on the screenshots you will find in Appendix 3:

Digigram Hardware Settings.

11.1.3 VOICEOVER PROCESS

PROCESS OVERVIEW

The voiceover recording process includes four steps:

1. Defining the Area to Record the Voiceover (see page 193)

2. Recording the Voiceover (see page 194)

3. Checking the Recorded Voiceover (see page 195)

4. Attenuating other Tracks when Using Voiceover (see page 196)

DEFINING THE AREA TO RECORD THE VOICEOVER

Mark In

Place the nowline in the timeline where the voiceover should start, then click the