Instruction Manual

Issue 1.00.B
nanoAir – Version 1.00 – User Manual
EVS Broadcast Equipment – April 2013
78
5.4.14 Transport Commands
How to Recue a Playlist
To know detailed information about recue, please refer to 5.4.8.
How to Play a Playlist
The Play command plays the loaded playlist.
To play a playlist, two methods are available to play a playlist:
 Press the Play button on the Transport Function Bar. The Play button lights
green when the playlist is on air.
How to Pause a Playing Playlist
The pause command stops the playout of an element in the loaded playlist at the current
position.
To pause a playing playlist, two methods are available:
 Press the Pause button from the Transport Function Bar. The button turns orange
and remains orange until user re-initiates the Playout.
 Use the keyboard shortcut: H.
How to Go to the First Frame
See section 5.4.7 for the GOTO IN/OUT function in Playlist Edit Pane.
How to Go to the Last Frame
See section 5.4.7 for the GOTO IN/OUT function in Playlist Edit Pane.
How to Go to the Next Clip
When a playlist is applied with Next command, if the playlist is in Play mode, the next
element is loaded immediately and played accordingly to its still mode.
If the playlist is in Pause mode, the playlist jumps to the IN point of the next element of
the playlist but remain paused.
To go to the next clip, press from the Transport Function Bar.