Instruction Manual

Issue 1.00.B

nanoAir – Version 1.00 – User Manual

EVS Broadcast Equipment – April 2013

5.3.4 Element Speed

The speed of clip in the playlist can be changed with the range during 0%~300%, and

then the clip of the playlist will be played out with the desirable speed.

To change the clip’s speed, proceed as follows:

1. Click the speed area of the clip in the loaded playlist.

2. Input the exact number which is from 0% to 300%, and then click other areas or just

press ENTER to validate this change.

To set normal speed by 100%, proceed as follows:

1. Select the speed area of the clip you want to change.

2. Two methods are available to set the normal speed:

a) Input 100% into the speed area.

b) Click the Speed Button on the left side of the speed area

3. The clip’s speed goes back to normal (100%)

Note

The default speed of a clip is always 100%.