User manual

For-A VFC-7000 Camera
Application Start
At application start, the recording starts on the first memory block.
Configuration Parameter Values
• Port = Ethernet
• Protocol = UDP
• The PGMSpeed parameter value 1000 is not available.
Key Behavior
• TAKE: this key is operational in ARM mode.
• RECORD: the remote beeps if the CAM key refers to an empty block.
• RECORD: pressing this key while the current block is recording clears all memory
blocks and starts recording on the first one.
• CLEAR: press this key to delete the current memory block data.
OPERATION MANUAL Multicam LSM 11.02
9. Advanced Control Modes 203