User manual

Search Based on Keywords
Select the keywords that you want to use as search criteria the same way as you select
them during assignment to a clip, in LIST or NUMERIC mode.
Up to three keywords can be selected as search criteria.
If all three keyword locations are used, some of them must be cleared before selecting a
new keyword:
• Press CLEAR+F1 / F2 / F3 to clear to corresponding keyword location.
To clear all three keyword locations and reset the ranking to the lowest level:
• Use the Reset command (SHIFT+A) at any time.
Search Based on Ranking
A ranking can also be used as the only search criteria, or can be combined to the
keywords as an additional criterion.
• Press the B key several times to select the desired ranking.
To clear all three keyword locations and reset the ranking to the lowest level:
• Use the Reset command (SHIFT+A) at any time.
Search Archive
This field allows selecting archive status for search criteria:
Parameter On the Remote
None (default) Archive
Clips not archived >Archive
Clips to be archived >Archive (blinking)
Clips archived >Archive
It is possible to include trains in the search. Use the B key to toggle between
CLIPS/CLIPS+REC/REC.
Search Based on From Date / To Date
Select FromDate and ToDate using the SHIFT+C and SHIFT+D keys. Pressing on any
of those keys changes the display on the key to dd/mm/yy to indicate the date format.
• The F keys are used to enter the date.
• The Clear key is the BACKSPACE.
To search only for a specific date, use the same date twice in the FromDate and ToDate
fields.
Once a date is entered, press CLEAR, SHIFT+C or CLEAR, SHIFT+D to respectively
reset the FromDate or ToDate to the default parameter (dd/mm/yy).
158 7. Keyword Management
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013