User manual

Issue

10.03.C

EVS Multicam

–

Version 10.03

–

Configuration Manual

EVS Broadcast Equipment SA – July 2010

to the Remotes, refer to the section related to the Hypermotion Management in the

XT Tech Ref Software manual.

3.15.4 PORT

Possible values: Port #2 to Port #6, Lan PC. Default : Port #6

This parameter specifies on which port (RS422 or Lan PC) the commands must be

sent to the hypermotion camera, and possibly to the PGM if you have selected

‘Hypermotion + LSM” in the Remote Mode parameter.

3.15.5 IP ADDRESS

Possible values: xxx.xxx.xxx.xxx

This parameter specifies the IP address of the PC LAN in case you have selected

the value ‘Lan PC’ for the Port parameter. If you have selected an RS422 port, the

IP address parameter is not relevant, hence not displayed.

3.15.6 DIAL SPEED

Possible values: 010 X to 1000 X

This parameter specifies by which factor the jog speed will be multiplied.