User manual

Issue

10.03.C

EVS Multicam

–

Version 10.03

–

Configuration Manual

EVS Broadcast Equipment SA – July 2010

Clips p.3.4

[F1]PLST Receive Pg : 1 2 3 4 5 6 7 8 9

[F2]Protocol receive Page : 06

[F3]Default XFile : XFile #31

[F4]Grab image : Disable

[F5]Browse button : Browse

[F6]Reset Archive Status

[Menu]Quit [Clr+F

]Dft [F9]PgUp [F0]PgDn

3.9.13 PLST RECEIVE PAGE

Possible values: Select one or more clip pages from 1 to 10. Default: Page 10

This function allows the operator to automatically create a local copy of all

network clips when copying a local or network playlist. In this setting, you need to

select the page(s) of your machine where clips received when using the

PLST+CLIPS copy function must be stored. Refer to the description of the Playlist

copy function for details. Clip pages can be assigned simultaneously as PUSH and

PLST Receive Pages.

3.9.14 PROTOCOL RECEIVE PAGE

Default: Protocol Receive page 6

This setting defines in which page

the clips created by protocol are stored. When

a page is full, clips are stored on the next page.

Only clips created on this page (and the other protocol pages if the first page is

full) are visible for protocols.

3.9.15 DEFAULT XFILE

Value: XFile name and network number. Default: -------- # --

This setting defines the XFile where clips must be sent to when using the

ARCHIVE function from the EVS Remote Panel or VGA screens.

3.9.16 GRAB IMAGE

Possible values: Disable (default) / Enable

When the function is enabled and a default XFile has been assigned, the grab

function is coupled with the Mark key on the Remote. Each time the Mark key is

used, a cue point is marked and a command is sent to the XFile to save that

image. The grab can also be activated on the keyboard with the combination CTRL

+ G.