User manual

EVS Multicam Version 10.03

–

Operating Manual

EVS Broadcast Equipment SA – July 2010

Issue

10.03.C

Rst Cam Local Sync Prv 2nd CTRL

Cam A Cam B Cam C --->

By pressing the D key (--->), the operator has access to the D, E and F

cameras. The operation menu becomes:

Rst Cam Local Sync Prv 2nd CTRL

Cam D Cam E Cam F <---

Press the D key (<---) to return to CAM A, B, C selection.

Rst Cam

This function restores the position of cameras on the active channels: CAM A on

PGM1, CAM B on PRV.

Note

When a clip/playlist is loaded on a channel, switching back to Live mode

will recall the record train, which was last used on that output. This

avoids too frequent uses of the RST CAM function.

Local

This function allows the user to reconnect to the local LSM after having accessed

distant clips or record trains. The function is highlighted when the user is

connected to both clips and record trains on the local LSM. It is displayed only on

Master/Server LSMs when they are connected to the SDTI network.

Sync Prv

This option allows the user to synchronize the PRV with the timecode and speed of

the PGM output. This function is not available with remote record trains.