User Manual User guide

6. Digitizing a Batch of Clips
6.1. Purpose
In Batch Digitize Mode, several clips can be queued in a Batch list, so that they will all be
digitized in one process run.
6.2. Process Overview
The process of digitizing a batch of clips can be summarized by the following steps.
Step See section...
1. Create a batch list.
OR
Open an existing batch list.
"How to Create a Batch List" on
page 26 and "Batch List
Management Buttons" on page
14.
2. Create a clip
• with Auto Edit option
• with Complete Tape option
• with Complete Tape and Duration
options
"How to Mark a Clip on a Tape" on
page 24 and "Process Overview"
on page 19.
3. Add the clip to the batch list
• Click the Add to Batch button.
Note
The Add to Batch button cannot be used with the Derush digitization
type.
4. Repeat steps 2 and 3 to add more clips to the batch list.
5. Start the digitization process
• Click the Batch Digitize button.
6.3. Managing Batch Lists
6.3.1. How to Create a Batch List
To create a Batch List, proceed as follows:
1. Click the New button.
The New Batch List window opens.
26 6. Digitizing a Batch of Clips
EVS Broadcast Equipment S.A. - June 2013 Issue 6.2.A