User Manual User guide

• A VTRdevice has been assigned to the VTRControl Panel.
• A recorder channel physically connected to a router OUT port has been assigned to
the VTRControl Panel.
How to Assign a Router INPort to a Recorder Channel
To assign an IN port of a video router to a recorder channel from the VTRControl Panel or
to change the assignment, proceed as follows:
1. Click the Change Recorder Input button next to the Recorder Channel field.
The Assign Recorder Source window opens:
It shows the name of the router INport already associated to the recorder channel.
2. Click the arrow next to the Router INPort field.
The list of all the router INports is displayed:
3. Select an INport.
The Router INPort field is highlighted to warn the users that the selection has
changed but has not been saved:
4. Click TAKE to send a command to the router service to link the router OUTport
connected to the recorder channel with the selected router INport.
The name of the INport is displayed next to the recorder channel name.
22 5. Digitizing a Clip
EVS Broadcast Equipment S.A. - June 2013 Issue 6.2.A