User Manual User guide

2. User Interface
2.1. Opening the VTR Control Panel
To open the VTR Control Panel, select the corresponding icon on
the IPDirector Application bar. At this time, you still need to assign a VTR device to the
VTR Control Panel. See section "Assigning a VTR Device" on page 15.
2.2. Overview of the VTR Control Panel
2.2.1. VTR Control Panel Outline
Introduction
The VTR Control Panel has been designed with various panes allowing its size to be
changed depending on the features in use.
You can use the Pane Display buttons to display or hide different window areas.
See section "Displays of the VTR Control Panel" on page 4 for an overview of the
possible displays of the VTR Control Panel.
Illustration
When fully expanded, the VTR Control Panel contains the areas highlighted on the
screenshot below:
2 2. User Interface
EVS Broadcast Equipment S.A. - June 2013 Issue 6.2.A