User Manual User guide

Automatic Clip Creation based on Logs
A clip can be created when a log is dragged into a bin. The current setting is used to define
the duration between the clip INpoint and the log timecode (Pre Mark) and the duration
between the log timecode and the clip OUTpoint (Post Mark).
Default values for the Pre Mark and Post Mark are 10 sec.
For more information on the creation of automatic clips, refer to the Database Explorer
user manual.
Default Clip ID Display Mode
The clip ID mode determines which ID will be used by default in the display: Name, UmID
or VarID.
Default XT for Partial Clip Restore
Clips published from XFile are displayed in the Database Explorer, and can be loaded to a
Control Panel. When the user creates a sub-clip from a file stored in XFile and published,
IPDirector will save the sub-clip on the EVS server specified in the option.
86 6. Settings
EVS Broadcast Equipment S.A. - June 2013 Issue 6.2.A