User Manual User guide

10.2.2. Using a Player Channel on a Video Display
Preliminary Steps
Before you can actually display a channel in the Video Display, you need to perform the
following tasks:
1. Make a physical connection from the required video source to the input of the A/V
board on the IPDirector workstation.
See section "Connecting the Video Source" on page 133.
2. Assign a player channel to the Video Display in the Remote Installer application.
See section "Assigning a Channel to a Video Display" on page 134.
3. Select the A/V board in the Video Display to open the related channel.
See section "Selecting the A/V Board in the Video Display" on page 135.
Connecting the Video Source
To be able to display a channel in the Video Display window, a physical connection must
be made from the required video source to the input of the IPDirector workstation A/V
board.
IPDirector- Version 6.2- User Manual- General Functions
10. Display Tools 133