User Manual User guide

Action Description
channel.
SKIP Initiates a command to skip the clip being played on the selected
channel.
TALLY Activates or deactivates the on-air flag on the selected channel.
EXITASAP Initiates a command to exit the loop as soon as possible without playing
the current element until its end and jump to the selected element.
EXITOUT Initiates a command to exit the loop as soon as the OUT point of the
current element is reached and jump to the selected element.
NONE No value is defined.
Channel
The Channel field allows the user to define the channel on which the GPI key action will
be executed. The possible values are:
• a channel of the EVS server to which the GPI is physically linked
• the None value.
Trigger Mode
The Trigger Mode field allows the user to define the type of trigger signal that will be sent
by the GPI to the EVS server. The following trigger modes can be defined:
Trigger Mode Description
Pulse Rising Edge The trigger is done on a rising edge pulse.
Pulse Falling Edge The trigger is done on a falling edge pulse.
Level High The trigger is done when the level changes to high level.
Level Low The trigger is done when the level changes to low level.
None No trigger mode is defined.
Note
If the operator selects None for one of the fields, all three fields are reset to
None. It is considered that the GPI is not used.
IPDirector- Version 6.2- User Manual- General Functions
6. Settings 91