User's Manual Owner manual

6.14. Adjusting the Audio Volume on the
Timeline
6.14.1. Introduction
You can adjust the audio volume for each track, i.e. group of audio channels, of a timeline
by means of the Volume Automation mode.
Note
You cannot use the volume automation feature on timeline elements whose
speed is different than 100%.
6.14.2. Accessing and Leaving the Volume
Automation Mode
• To access the Volume Automation mode on a given track of the loaded timeline, click
the Volume Automation button on the right of the track display.
• To leave the Volume Automation mode, click the button.
6.14.3. Overview of the Possible Actions
In the Volume Automation mode, you can perform the following actions:
• Increase or decrease the global audio volume of a track
• Increase or decrease the volume of a part of a track
• Modify the audio level on a given position of a track
• Reset the audio volume of a whole audio track
• Reset the audio volume of the audio track of a given element
6.14.4. Audio Volume Automation Panel
Overview
The Audio Volume Automation panel contains the main areas highlighted on the following
screenshot and shortly described in the table below.
IPDirector- Version 6.00- User Manual- IPEdit
6. Timeline 193