User's Manual Owner manual

Action = Default Transition
When a Default Transition action is applied to an element at a given timecode, the playout
parameters are reset to the default values specified in the Tools > Settings > Playlist >
Playlist / Default Transition category.
Selecting Default Transition action in the Playlist Macro Commands Settings does not
display any configuration window as there is no parameter to define.
Action = Freeze
When a Freeze action is applied to an element, a Freeze effect is inserted within the
element. See section "Inserting a Freeze Effect in a Playlist Element" on page 94 for more
information on this effect.
Selecting Freeze action in the Playlist Macro Commands Settings displays the Freeze
window:
146 1. Playlist Panel
EVS Broadcast Equipment S.A. - November 2012 Issue 6.00.B