User's Manual User Manual

Step See section...
1. Create a batch list.
OR
Open an existing batch list.
"How to Create a Batch List" on
page 69 and "Batch List
Management Buttons" on page 60.
2. Create a clip
• with Auto Edit option
• with Complete Tape option
• with Complete Tape and Duration
options
"How to Mark a Clip on a Tape" on
page 67 and "Process Overview"
on page 65.
3. Add the clip to the batch list
• Click the Add to Batch button.
Note
The Add to Batch button cannot be used with the Derush digitization
type.
4. Repeat steps 2 and 3 to add more clips to the batch list.
5. Start the digitization process
• Click the Batch Digitize button.
3.6.3. Managing Batch Lists
How to Create a Batch List
To create a Batch List, proceed as follows:
1. Click the New button.
The New Batch List window opens.
2. Enter a name for the Batch List, and a description if needed.
3. Click OK.
The batch list name is displayed in the field on the top left corner of the Batch List pane.
How to Import a Batch List
The Batch List can be prepared outside IPDirector and saved as a CSV (Comma
Separated Value) file or a TXT (Text) file. These files can be imported straight into
IPDirector.
To import a Batch List, proceed as follows:
1. Click the Import button
2. Select the list you wish to import
3. Select the file format
IPDirector- Version 6.00- User Manual- Ingest Modules
3. VTR Control Panel 69