User's Manual User Manual

1.3.2. Assigning a Channel to a Recorder Panel
Introduction
There are several methods to assign a recorder channel to the Recorder Panel. Some of
the methods will directly open an instance of the Recorder Panel. Others are used when
the Recorder Panel is already open.
• Open the Recorder Panel and assign a channel from the Channel Explorer.
• Open the Recorder Panel and assign a channel from the Channel field in the Recorder
Panel.
Depending on the EVS server configurations, up to 6 recorder channels can be available
per server.
How to Assign a Recorder Channel from the Channel
Explorer
To open the Recorder Panel and assign a channel to it from the Channel Explorer, proceed
in one of the following ways:
• In the Channel Explorer, double-click on the corresponding recorder channel name.
• Right-click a recorder channel and select Open Recorder Panel from the contextual
menu.
How to Assign a Recorder Channel from the Channel
Field
To assign a recorder channel from the Recorder Panel, proceed as follows:
1. Right-click the Channel field
A contextual menu displays the available recorder channels:
6 1. Recorder Panel
EVS Broadcast Equipment S.A. - November 2012 Issue 6.00.A