User's Manual User Manual

Then, select the tab corresponding to the MPlay Remote device.

Several MPlay remote devices can be connected. In this case, as many tabs are

displayed as they are devices. One of the devices is defined as Master, the other ones as

slaves. This is done in the Remote Installer. Refer to the Technical Reference manual.

You will be able to control up to four player channels with one device.

Assigning Player Channels

How to Assign Player Channels from the Channel Name Contextual

To assign a player channel to the MPlay Remote from the Channel Name field of the

Remote Control Manager window, proceed as follows:

1. In the Remote Control Manager window, right-click one of the Channel Name field. A

contextual menu is displayed:

IPDirector- Version 6.00- User Manual- General Workspace

3. System Management 73